Get Familiar With The Reasons Why Garage Door Refuses To Close

Garage doors are large and heavy moving parts of any building. To prevent any kind of injuries automatic openers include safety sensors. It disallows the door from closing, when something or someone is in its way.

The malfunction in the sensors does not allow the shutters to go down. If it goes down but does not hit the floor, then the opener needs adjustment. It is vital that you keep the floor near the garage door clear and clean all the time, or else the movement will get impeded, even with small objects.

Get Familiar With The Reasons Why Garage Door Refuses To Close

Absolute Convenience

Automatically operating garage doors are a great convenience for car owners because these can be operated using a handheld device. It helps to avoid opening the garage door manually in harsh weather, while leaving or returning. Garage doors protect your car from elements and vandalism.

Majority of homeowners use their garage to store extra stuff and tools. An incomplete closed door is a safety concern because the garage may possibly be a way into your house. It is not wise to compromise the security and integrity of your house with slightly open garage door. It can be vulnerable not only to thieves but also to insects and rodents.

You can get a lot of information on the ways to detect and fix common issues yourself, but it is sensible to call a garage door repair service. Companies like RS garage door service San Diego, offer top quality services at reasonable price.

Reasons of Garage Door not Shutting Down

Misaligned sensors

  • Basically, misaligned sensors are the root of garage doors refusing to close.
  • You will find one infrared sensor blinking, which means they are not functioning properly.
  • The sensor wiring has to be checked. Tighten them and the sensors will get aligned, and thereby permitting the door to close on pressing the remote button.
  • There may be obstacles in the path that may not allow closing the door, so remove them.
  • Sensor eyes may have dirt accumulated, so clean them.
  • Unplugging and re-plugging the garage door openers can reset sensors and solve the issue.

Warped Track

  • Partial closing of door means track is warped, loose, or clogged.
  • If sensor light blinks or flickers means track is warped.
  • Clean track with rag or brush.
  • In winter, grease in tracks expands causing misalignment.
  • Gently tap on the slightly bent track to restore its alignment.

Lithium Grease

  • Special lubricant is used on the garage motors because grime and dust accumulation can stop the motor from closing doors.
  • Lithium grease is recommended because it does not attract grime and dirt, which can block the tracks of automatic garage door

Garage Door Openers

  • The down limit switch may need adjustment.
  • Down limit switch is located on the opener’s motor housing.
  • Adjust this switch, but make sure you don’t correct it too far because it can bend the track, which can damage the opener excessively.

It is necessary to get familiar with automatic garage opening system for home and possession safety. In addition, proper professional maintenance schedule and inspection for common malfunction issues is necessary for avoiding extra damages to the system.

Leave a Reply

Your email address will not be published. Required fields are marked *